Brocade Communications Systems StoreFabric SN6500B User Manual page 1049

3. Click the Provide the IP Address / Node WWN / Name of the source button if you want to
4. Click the Select from the available list of sources button as an alternative to manually entering
5. Select the Use Ifindex in source matching check box if you want to use ifIndex to filter traps on
6. If the Use IfIndex in source matching check box is selected, select the varbind to be used from
7.
8. Click Next.
Brocade Network Advisor SAN User Manual
53-1002696-01
manually enter the IP address, the world wide name (WWN), or the name of the source in the IP
Address field.
the IP address, WWN, or name of the source. You can select source address products or ports
to use as event senders from the available list of sources.
a specific port of a product; otherwise, the filter is applied globally on a product.
the Trap Varbind (IfIndex) list.
Select the event senders you want from the Available Sources list, then click the right arrow
button to move them in the Selected Sources list.
•
If you selected a non-Brocade product as the source, that product can send e-mail alerts
only.
•
If you selected Pseudo Events from the Events pane of the Add Event Action dialog box,
and there is only one pseudo event available, double-click the pseudo event in the
Available Sources list.
•
If you selected a product group or port group as event senders, select a group from the list.
NOTE
The selected source count cannot exceed 100.
The Policy pane of the Add Event Action dialog box displays. Proceed to
action policies".
Event action definitions
"Configuring event
32
1001