Removing A Name From A Device; Editing Names; Exporting Names - Brocade Communications Systems StoreFabric SN6500B User Manual

5
SAN name settings
5. Click OK on the Configure Names dialog box.

Removing a name from a device

1. Select Configure > Names.
2. In the Display table, select the name you want to remove.
3. Click Remove.
4. Click Yes.
5. Click OK to close the Configure Names dialog box.
6. Click OK on the confirmation message.

Editing names

To edit the name associated with a device, complete the following steps.
1. Select Configure > Names.
2. Select All Names from the Display list.
3. Click the name you want to edit in the Name column.
4. Edit the name and press Enter.
5. Click OK to close the Configure Names dialog box.
6. Click OK on the confirmation message.

Exporting names

To export the names associated with devices, complete the following steps.
1. Select Configure > Names.
2. Click Export.
3. Browse to the location where you want to save the export file.
4. Enter a name for the file and click Save.
98
The Configure Names dialog box displays.
An application message displays asking if you are sure you want clear the selected name.
The Configure Names dialog box displays.
Only devices with a name display. The table displays the Name, WWN, Operational Status,
Type, and a Description of the device.
The Configure Names dialog box displays.
The Export Files dialog displays.
Depending on your operating system, the default export location are as follows:
•
Desktop\My documents (Windows)
•
\root (Linux)
Brocade Network Advisor SAN User Manual
53-1002696-01