Resetting Optional Messages; Configuring E-Mail Notification - Brocade Communications Systems StoreFabric SN6500B User Manual

6
User profiles
3. Click OK on the Password Policy dialog box.
4. Click OK on the User Profile dialog box.

Resetting optional messages

To reset all Management application optional messages to their default behaviors, complete the
following steps.
1. Select Server > User Profile.
2. Click Optional Messages Reset.
3. Click Yes on the confirmation message.
4. Click OK on the User Profile dialog box.

Configuring e-mail notification

To configure and enable e-mail notification, complete the following steps.
1. Select Server > User Profile.
2. Select the E-mail Notification - Enable check box to enable e-mail notification.
3. Click Filter to set up basic event filter.
164
•
Minimum Length—The minimum length allowed for the password.
•
Upper Case Characters—The minimum number of uppercase characters required in the
password.
•
Lower Case Characters—The minimum number of lowercase characters required in the
password.
•
Number of Digits—The minimum number of digits required in the password.
•
Punctuation Required—The minimum number of punctuation characters required in the
password.
•
Maximum Repeat—The maximum number that the same character can repeat without a
different intervening character in the password.
•
Maximum Sequence—The maximum number of sequence characters from the ASCII
collating series or keyboard sequences in the password.
The User Profile dialog box displays.
The Password Policy dialog box displays.
A successful reset message displays.
The User Profile dialog box displays.
For step-by-step instructions about setting up basic event filters, refer to
event filtering" on page 975.
"Setting up basic
Brocade Network Advisor SAN User Manual
53-1002696-01