Viewing Configuration File Content - Brocade Communications Systems StoreFabric SN6500B User Manual

2. Select the configuration you want to restore, and click Restore.

Viewing configuration file content

NOTE
This feature requires a Trial or Licensed version.
You can view switch configuration file content in a text file.
1. Right-click a device in the Product List or the Connectivity Map, and select Configuration >
2. Click View.
Brocade Network Advisor SAN User Manual
53-1002696-01
•
Discovered — Whether the switch is discovered or not.
Yes — The switch is discovered.

No — The switch was deleted from discovery.

•
Comments — Comments regarding the switch.
The configuration is downloaded to the device. If necessary, the restoration process prompts
you to disable and reboot the device before the configuration begins. This lets you determine
whether the configuration backup should be performed immediately or at a later time.
If you confirm the restoration, the entire configuration is restored; you cannot perform selective
download for specific configuration sections.
You can also perform the following functions from this dialog box:
•
"Keeping a copy past the defined age limit"
•
"Viewing configuration file content"
•
"Deleting a configuration"
•
"Exporting a configuration"
•
"Importing a configuration"
Configuration Repository.
The Switch Configuration Repository dialog box displays.
The configuration details display, Details include the backed-up switch, including boot
parameters, licensing information, and configuration. If you want to save the contents as a text
file, click Copy to Clipboard, paste the copy into a text editor (such as, Notepad), and save the
file.
Configuration repository management
on page 336
on page 333
on page 335
on page 335
on page 336
12
333