Removing Engines From An Ha Cluster - Brocade Communications Systems StoreFabric SN6500B User Manual

20
High availability (HA) clusters
FIGURE 283
NOTE
If you are creating a new HA cluster, a dialog box displays requesting a name for the new HA cluster.
HA Cluster names can have up to 31 characters. Letters, digits, and underscores are allowed.

Removing engines from an HA cluster

Removing the last engine from an HA cluster also removes the HA cluster.
If only one engine is removed from a two-engine cluster, you must either add another engine to the
cluster, or remove the other engine.
1. Select Configure > Encryption from the menu task bar to display the Encryption Center
2. Select an encryption group from the Encryption Center Devices table, then select Group >
3. Select an engine from the High Availability Clusters table, then click the left arrow (Refer to
4. Either remove the second engine or add a replacement second engine, making sure all HA
5. Click OK.
638
Encryption Group Properties dialog box - HA Clusters tab
dialog box (Refer to Figure 185
HA Cluster from the menu task bar.
The Encryption Group Properties dialog box displays, with the HA Clusters tab selected.
Figure 283).
clusters have exactly two engines.
on page 526).
Brocade Network Advisor SAN User Manual
53-1002696-01