Disabling Port Auto Disable On All Ports On A Device; Unblocking Ports - Brocade Communications Systems StoreFabric SN6500B User Manual

7.
8. Click OK on the Port Auto Disable dialog box.

Disabling port auto disable on all ports on a device

NOTE
The device must be running Fabric OS 6.3 or later.
To disable port auto disable on all ports on a device, complete the following steps.
1. Select Configure > Port Auto Disable.
2. Select the fabric on which you want to disable port auto disable (PAD) from the Fabric list.
3. Select All Ports from the Show list.
4. Select the device on which you want to disable PAD on all ports.
5. Click Configure.
6. Clear any of the following selected event types.
7.
8. Click OK on the Port Auto Disable dialog box.

Unblocking ports

NOTE
The device must be running Fabric OS 6.3 or later.
To unblock ports, complete the following steps.
1. Select Configure > Port Auto Disable.
2. Select the fabric on which you want to enable port auto disable (PAD) from the Fabric list.
3. Select Blocked Ports from the Show list.
4. Click Unblock.
5. Click OK on the Port Auto Disable dialog box.
Brocade Network Advisor SAN User Manual
53-1002696-01
Click OK on the Configure Port Auto Disable dialog box.
The Port Auto Disable dialog box displays.
The Configure Port Auto Disable dialog box displays.
•
Port Auto Disable
•
Loss Of Sync — Requires devices running Fabric OS 7.0 or later.
•
Loss Of Signal — Requires devices running Fabric OS 7.0 or later.
•
OLS (Offline Primitive Sequence) — Requires devices running Fabric OS 7.0 or later.
•
NOS (Not Operational Primitive Sequence) — Requires devices running Fabric OS 7.0 or
later.
•
LIP (Loop Initialization Primitive Sequence) — Requires devices running Fabric OS 7.0 or
later.
Click OK on the Configure Port Auto Disable dialog box.
The Port Auto Disable dialog box displays.
12
Port Auto Disable
385