San Inventory Widget - Brocade Communications Systems StoreFabric SN6500B User Manual

8
Dashboard widgets

SAN Inventory widget

The SAN Inventory widget
FIGURE 63
The SAN Inventory widget includes the following data:
•
•
•
•
Customizing the SAN Inventory widget
You can customize the SAN Inventory widget to display the product inventory for a specific group.
The group type and number of devices in the group displays to the left of the associated bar; for
example, v7.0.0 [3], where v7.0.0 is the firmware number and [3] is the number of devices running
that firmware level.
200
(Figure
SAN Inventory widget
Severity icon/product count/widget title — The color of the worst severity followed by the
number of products with that severity displays before to the widget title.
Group By list — Use to customize this widget to display a specific group of products. Options
include: Firmware, Model, Location, and Contact.
Bar chart — The product status as a percentage of the total number of products.
The bar chart displays each group as a separate bar on the graph. Displays the current state of
all products discovered for a group in various colors on each bar. Tooltips showing the number
of devices in that state are shown when you pause on the bar.
Color legend — Displays the color legend below the bar chart using the color codes in
TABLE 25
SAN Inventory status color codes
Color Type
Green Healthy
Yellow Marginal
Red Down
Maroon Not Reachable
Gray Unknown
63) displays the SAN products inventory as stacked bar graphs.
Brocade Network Advisor SAN User Manual
53-1002696-01
Table 25: