Viewing Zone Properties - Brocade Communications Systems StoreFabric SN6500B User Manual

21
Zoning configuration
2. Click the Zone DB tab if that tab is not automatically displayed.
3. Select a fabric from the Zoning Scope list.
4. Click New Zone.
5. Type the name for the zone.
6. (Optional—Fabric OS only) Set the QoS for the zone by right-clicking the zone and selecting QoS
The new, empty zone is created. You cannot save an empty zone. Refer to
zone"

Viewing zone properties

1. Select Configure > Zoning > Fabric.
2. Click the Zone DB tab if that tab is not automatically displayed.
3. Select a fabric from the Zoning Scope list.
4. Right-click the zone you want to review in the Zones list and select Properties.
5. Review the zone properties.
6. Click OK to close the Zone Properties dialog box.
718
This identifies the target entity for all subsequent zoning actions and displays the zoning
database for the selected entity.
A new zone displays in the Zones list.
For zone name requirements and limitations, refer to
> Priority_Level (High, Medium, or Low).
NOTE
QoS priority support is available for zones with WWN or Domain,Index (D,I) members.
QoS zones using D,I notation cannot be created if any of the switches in the fabric are running
Fabric OS versions earlier than 6.3.0.
The zone name is automatically renamed to QoSX_Zone_Name, where X is the priority level
(H—High, M—Medium, or L—Low) and Zone_Name is the name you entered for the zone.
on page 719 for instructions on adding members and saving the zone.
The Zoning dialog box displays.
This identifies the target entity for all subsequent zoning actions and displays the zoning
database for the selected entity.
The Zone Properties dialog box displays.
Note that when any modifications are made to an active zone, the Zone Properties dialog box
continues to show the status as Active until the changes are saved to the zone database.
You can change the zone name by double-clicking the name and then modifying the name in
the editable field.
"Zone naming conventions"
"Adding members to a
Brocade Network Advisor SAN User Manual
on page 716.
53-1002696-01