Renaming A Zone Configuration; Deleting A Zone Configuration - Brocade Communications Systems StoreFabric SN6500B User Manual

•
•
1. Select Configure > Zoning > Fabric.
2. Click the Active Zone Configuration tab.
3. Select a fabric from the Active Zone Configuration list.
4. Click Deactivate.
5. Click Yes on the confirmation message.
6. Click OK or Apply to save your changes.

Renaming a zone configuration

1. Select Configure > Zoning > Fabric.
2. Click the Zone DB tab if that tab is not automatically displayed.
3. Select a fabric from the Zoning Scope list.
4. Right-click the name of the zone configuration you want to change in the Zone Configurations
5. Type the new name for the zone configuration.
6. Press Enter to save the new name.
7.

Deleting a zone configuration

1. Select Configure > Zoning > Fabric.
2. Click the Zone DB tab if that tab is not automatically displayed.
Brocade Network Advisor SAN User Manual
53-1002696-01
The selected fabric is not supported by the Management application.
The selected fabric is no longer discovered.
The Zoning dialog box displays.
This identifies the target entity for all subsequent zoning actions and displays the zoning
database for the selected entity.
If the deactivation succeeded, the zone configuration no longer displays in the Active Zone
Configuration tab.
If the deactivation failed, the zone configuration still displays in the Active Zone Configuration
tab.
Any zones or zone configurations you have changed are saved in the zone database.
The Zoning dialog box displays.
This identifies the target entity for all subsequent zoning actions and displays the zoning
database for the selected entity.
list and select Rename.
For zone configuration name requirements and limitations, refer to
on page 716.
Click OK or Apply to save your changes.
Any zones or zone configurations you have changed are saved in the zone database.
The Zoning dialog box displays.
Zoning configuration
"Zone naming conventions"
21
731