Displaying Fabric Properties From The Fcip Tunnels Dialog Box; Troubleshooting Fcip Ethernet Connections - Brocade Communications Systems StoreFabric SN6500B User Manual

22

Displaying fabric properties from the FCIP Tunnels dialog box

Displaying fabric properties from the FCIP Tunnels dialog box
Fabric properties are displayed on the FCIP Tunnels dialog box when you select a fabric.
(Figure
FIGURE 362

Troubleshooting FCIP Ethernet connections

1. Right-click a blade an extension blade or switch from the Fabric Tree structure or Connectivity
2. Select the Port tab.
3. Select GigE from the Type drop-down list.
4. Select an Ethernet port.
5. Click Troubleshooting.
798
362).
Fabric properties on the FCIP Tunnels dialog box
Map, and select Properties.
The following options are presented:
-
IP Ping—Tests connections between a local Ethernet port (ge0 or ge1) and a destination IP
address.
-
IP Traceroute—Traces routes from a local Ethernet port (ge0 or ge1) to a destination IP
address.
Brocade Network Advisor SAN User Manual
53-1002696-01