Stop Monitoring Of Discovered Fabrics - Brocade Communications Systems StoreFabric SN6500B User Manual

For Professional and Professional Plus, the default monitoring interval is 120 seconds (minimum
interval is 120 seconds).
Table 6 details the default and minimum monitoring intervals used to query the monitored
switches:
TABLE 16
SAN Size
Small
Medium
Large
To change the monitoring interval, refer to

Stop monitoring of discovered fabrics

NOTE
Monitoring is not supported on Hosts.
When you stop monitoring a fabric, the Management application performs the following actions:
•
•
•
•
•
•
To stop monitoring a fabric and all associated devices, complete the following steps.
1. Select Discovery > Fabrics.
2. Select the fabric you want to stop monitoring from the Discovered Fabrics table.
3. Click Unmonitor.
4. Click Close on the Discover Fabrics dialog box.
Brocade Network Advisor SAN User Manual
53-1002696-01
Monitor Intervals
Default
120 seconds (2 minutes)
900 seconds (15 minutes)
1800 seconds (30 minutes)
Stops all data collection for the fabric and all associated devices.
Unregisters as SNMP trap recipient from the fabric and all associated devices.
Unregisters as SYSLOG recipient from the fabric and all associated devices.
Does not perform any scheduled or on demand operations (other than monitor) on the fabric
and all associated devices.
Removes the fabric and all associated devices from product list, topology, and all feature dialog
boxes.
Displays the fabric and all associated devices in the Discovery Fabrics dialog box with the
unmonitored icon and prefixes "Unmonitored" to the discovery status
The Discover Fabrics dialog box displays.
SAN Fabric monitoring
Minimum
60 seconds (1 minute)
120 seconds (2 minutes)
180 seconds (3 minutes)
"Configuring asset polling"
4
on page 120.
53