Brocade Communications Systems StoreFabric SN6500B User Manual page 487

3. Highlight the selected switch and click OK to start the configuration.
Brocade Network Advisor SAN User Manual
53-1002696-01
The running configuration is saved to the selected switch, effective on the next system startup.
If you restore the DCB switch using the Restore Switch Configuration dialog box, you are
prompted to select one of two restoration methods:
•
As the running configuration and reboot
Rebooting a switch connected to a fabric will stop all traffic to and from the switch. All ports
on the switch will become inactive until the switch comes back online.
•
As the startup configuration (no reboot)
For instructions on how to restore a saved switch configuration, refer to the section
a switch configuration for a selected device"
Save running configurations
in the "Device Configuration" chapter.
16
"Restoring
439