Adding A Tool - Brocade Communications Systems StoreFabric SN6500B User Manual

OR
1. Select a Fabric OS device.
2. Select Monitor > Fabric Watch > Configure.

Adding a tool

You can specify third-party tools so they appear on the Setup Tools dialog box. From there, you can
add them to the Tools menu and then open the tools directly from the Management application.
To add a tool, complete the following steps.
1. Select Tools > Setup.
2. Click the Tools Menu tab.
3. Click Define.
FIGURE 102
4. Type the tool's name in the Tool Name field as you want it to appear on the Tools menu.
5. Type or browse to the path of the executable file in the Path field.
6. Type or browse to the path of the folder that you want to set as your working folder in the
7.
8. Click OK to save your work and close the Define Tools dialog box.
9. Click OK to save your work and close the Setup Tools dialog box.
Brocade Network Advisor SAN User Manual
53-1002696-01
Fabric Watch displays.
The Setup Tools dialog box displays.
The Define Tools dialog box displays
Define Tools dialog box
Working Folder field.
Click Add to add the tool.
The Setup Tools dialog box displays with the new tool added to the Tools Menu Item table.
NOTE
You must click Add before clicking OK; otherwise, your changes will be lost.
To add this tool to the Tools menu, refer to
(Figure 102).
"Adding an option to the Tools menu"
10

Adding a tool

on page 280.
279