Editing An Aor; Copying An Aor - Brocade Communications Systems StoreFabric SN6500B User Manual

6
Areas of responsibility

Editing an AOR

NOTE
You cannot edit system AORs.
To make changes to an existing AOR, complete the following steps.
1. Select Server > Users.
2. Select the AOR you want to edit in the AOR table and click Edit.
3. Complete
4. Click OK to save the AOR and close the Edit AOR dialog box.
5. Click Close to close the Users dialog box.

Copying an AOR

NOTE
You cannot duplicate system AORs.
To create a new AOR by copying an existing one, complete the following steps.
1. Select Server > Users.
2. Select the AOR you want to copy in the AOR table and click Duplicate.
3. Complete
4. Click OK to save the new AOR and close the Duplicate AOR dialog box.
5. Click Close to close the Users dialog box
152
The Users dialog box displays.
The Edit AOR dialog box displays.
step 3 through step 5
If you make changes to the user's role or AOR while the user is logged in, a confirmation
message displays. When you click Yes on the confirmation message, the user is logged out and
must log back in to see the changes.
The Users dialog box displays.
The Duplicate AOR dialog box displays.
step 3 through step 5
The new AOR displays in the AOR table of the Users dialog box. To add this AOR to a user, follow
the instructions in "Assigning roles and areas of responsibility to a user account"
in "Creating an AOR" on page 151.
in "Creating an AOR" on page 151.
Brocade Network Advisor SAN User Manual
on page 144.
53-1002696-01