20
Steps for connecting to a KMIP appliance (SafeNet KeySecure)
Configuring the KMIP server
1. From the KeySecure Management Console, select the Device tab, then select Device
FIGURE 225
2. Under Cryptographic Key Server Settings, select KMIP as the protocol.
3. Ensure that the Use SSL check box is selected.
4. Click Edit to open a dialog box for changing IP, Port, and Server Certificate settings.
5. Verify the settings in the table are correct.
588
Configuration > Key Server > Key Server.
The Cryptographic Key Server Configuration page displays
KeySecure Cryptographic Key Server Configuration page
(Figure
225).
Brocade Network Advisor SAN User Manual
53-1002696-01