Brocade Communications Systems StoreFabric SN6500B User Manual page 935

6. Select a port row in the Selected Ports table to display the detailed status in the Status Details
Brocade Network Advisor SAN User Manual
53-1002696-01
•
Link traffic
•
Latency measurement
•
Measure link distance
TABLE 78
Supported link distance measurements
SFP speed
10 Gbps
16 Gbps
If any of the tests fail, the Management application does not rollback to already executed
operations.
When the test successfully completes, the Management application performs the following
operations to change the port type back to E-port:
1. Disable the source port.
2. Disable the destination port.
3. Disable the diagnostic mode on source D-port.
4. Disable the diagnostic mode on destination D-port.
5. Enable the source port.
6. Enable the destination port.
The Progress column shows whether the test is not started, in progress, or completed.
The Status column shows the overall status (Success or Failed) of the test.
of the Selected Row table.
The Status Details of the Selected Row table displays with the details of the port selected for
diagnosis, the details of the tests performed, the results of the test, as well as short
description of the test results. The following table details the messages that display depending
on the success or failure of the operations and tests.
TABLE 79 Status Detail messages
Operation/Test
Disable the source or destination
port
Enable the diagnostic mode on
source or destination E ports
Enable the source or destination
port
Accuracy
124 meters
5 meters
Possible message
Disabled the port slot_number/port_number of the switch
switch_IP_address.
Failed to disable the port slot_number/port_number of the switch
switch_IP_address.
Reason: CAL_error_message
Enabled diagnostic mode on port slot_number/port_number of the
switch switch_IP_address.
Failed to enable diagnostic mode on port slot_number/port_number of
the switch switch_IP_address.
Reason: CAL_error_message
Enabled the port slot_number/port_number of the switch
switch_IP_address.
28
FC troubleshooting
Precision
+ or - 50meters
+ or - 5 meters
887