20
Adding a switch to an encryption group
FIGURE 280
7.
634
Configuration Status dialog box
All configuration items have green check marks if the configuration is successful. A red stop
sign indicates a failed step. A message displays below the table, indicating the encryption
switch was added to the group you named, and the public key certificate is stored in the
location you specified.
Review important messages, then click Next.
The Error Instructions dialog box displays
certificates for the encryption switch are displayed. These instructions are specific to the key
vault type.
(Figure
281). Instructions for installing public key
Brocade Network Advisor SAN User Manual
53-1002696-01