Customizing The Zone Member Display; Enabling Or Disabling The Default Zone For Fabrics - Brocade Communications Systems StoreFabric SN6500B User Manual

5. (Optional) Type a new name for the zone and press Enter to save the name.
6. Click OK or Apply to save your changes.

Customizing the zone member display

In the Zoning dialog box, you can customize which properties are displayed and in what order.
1. Select Configure > Zoning > Fabric.
2. Click the Zone DB tab if that tab is not automatically displayed.
3. Select a fabric from the Zoning Scope list.
4. Click the plus sign (+) by the appropriate zone in the Zones list to expand the listing and show
5. Right-click the name of any zone member and select Member Display.
6. Select or clear the check boxes for the properties you want to display or hide.
7.
8. Click OK.

Enabling or disabling the default zone for fabrics

1. Select Configure > Zoning > Fabric.
2. Click the Zone DB tab if that tab is not automatically displayed.
3. Select a fabric from the Zoning Scope list.
4. Select the zoning database you want from the Zone DB list.
5. Click Zoning Policies.
Brocade Network Advisor SAN User Manual
53-1002696-01
Depending on the characters included in the name you enter, a message may display informing
you the name contains characters that are not accepted by some switch vendors. Click OK and
enter a different name or accept the default name assigned to the zone. (For zone name
requirements and limitations, refer to
Any zones or zone configurations you have changed are saved in the zone database.
The Zoning dialog box displays, based on the Configure > Zoning menu selection.
This identifies the target entity for all subsequent zoning actions and displays the zoning
database for the selected entity.
the zone members.
The Zone Member Display dialog box displays.
All of the options are selected by default. You cannot clear the WWN/Domain,Port Index check
box. It is always selected.
Select a property and click the Up or Down buttons to rearrange the order in which the
properties are displayed.
The display is changed for all zone members in the Zones list.
The Zoning dialog box displays.
This identifies the target entity for all subsequent zoning actions and displays the zoning
database for the selected entity.
The Zoning Policies dialog box displays.
Zoning configuration
"Zone naming conventions"
21
on page 716.)
723