Configuring a one-time policy monitor schedule
To configure a one-time schedule, complete the following steps.
1. Select One Time from the Frequency list.
2. Select the time of day you want deployment to run from the Time (hh:mm) lists.
3. Click the Date list to select a date from the calendar.
4. Click OK on the Schedule Properties dialog box.
Configuring an hourly policy monitor schedule
To configure an hourly schedule, complete the following steps.
1. Select Hourly from the Frequency list.
2. Select the minute past the hour you want deployment to run from the Minutes past the hour
3. Click OK on the Schedule Properties dialog box.
Configuring a daily policy monitor schedule
To configure a daily deployment schedule, complete the following steps.
1. Select Daily from the Frequency list.
2. Select the time of day you want deployment to run from the Time (hh:mm) lists.
3. Click OK on the Schedule Properties dialog box.
Brocade Network Advisor SAN User Manual
53-1002696-01
Where the hour value is from 1 through 12, the minute value is from 00 through 59, and the
day or night value is AM or PM.
To finish configuring the policy monitor, return to
page 959.
list.
Where the minute value is from 00 through 59.
To finish configuring the policy monitor, return to
page 959.
Where the hour value is from 1 through 12, the minute value is from 00 through 59, and the
day or night value is AM or PM.
To finish configuring the policy monitor, return to
page 959.
Policy monitor scheduling
step 6
of
"Adding a policy monitor"
step 6
of
"Adding a policy monitor"
step 6
of
"Adding a policy monitor"
31
on
on
on
965