Deleting A Traffic Class Map; Assigning A Traffic Class Map To A Port Or Link Aggregation Group - Brocade Communications Systems StoreFabric SN6500B User Manual

16
QoS configuration
3. Click the QoS tab on the Edit Switch dialog box.
4. Select a Traffic Class map from the Traffic Class Maps list and click the left arrow button to
5. Keep the same Traffic Class map name and modify the values, as required.
6. Click the right arrow button to re-add the map to the Traffic Class Maps list.
7.

Deleting a Traffic Class map

1. Select Configure > DCB.
2. Select a switch, and click Edit.
3. Click the QoS tab on the Edit Switch dialog box.
4. Select a Traffic Class map that you want to delete from the Traffic Class Maps list.
5. Click the left arrow button.
6. When you have finished the configuration, click OK to launch the Deploy to Products dialog
7.
8. Click Start on the Deployment Status dialog box to save the changes to the selected devices.

Assigning a Traffic Class map to a port or link aggregation group

You can assign a Traffic Class map to a port or ports under the LAG; however, a port does not
require a Traffic Class map be assigned to it. A port can have either a DCB map or a Traffic Class
map assigned to it, but it cannot have both.
NOTE
You cannot configure QoS or LLDP-DCBX on a LAG.
1. Select Configure > DCB.
2. Select a port or LAG, and click Edit.
460
The QoS dialog box displays.
load its values to the left pane. The fields are now editable.
If the name of the Traffic Class map already exists, an overwrite warning message displays.
Click Yes to overwrite the existing Traffic Class map.
When you have finished the configuration, click OK to launch the Deploy to Products dialog
box.
The DCB Configuration dialog box displays, showing the status of all DCB-related hardware and
functions.
The QoS dialog box displays.
The selected Traffic Class map row is removed from the list.
box.
Click OK after changing the attributes of the current deployment.
The Deployment Status dialog box launches.
The DCB Configuration dialog box displays, showing the status of all DCB-related hardware and
functions.
Brocade Network Advisor SAN User Manual
53-1002696-01