Editing A Deployment Configuration - Brocade Communications Systems StoreFabric SN6500B User Manual

27

Editing a deployment configuration

Editing a deployment configuration

1. Select Configure > Deployment.
2. Select a deployment configuration in the Saved or Scheduled tab.
3. Click Edit.
4. Update the dialog box with the information you want to change.
876
The Deployment dialog box displays, as shown in
FIGURE 391
Deployment dialog box
Policy-based routing configurations cannot be edited.
A dialog box specific to the type of deployment displays. This is the same dialog box that was
used when the deployment was created.
Figure 391.
Brocade Network Advisor SAN User Manual
53-1002696-01