5. Select the Include newly discovered fabrics check box to automatically add all newly
6. Click OK.
NOTE
After, enabling historical data collection, information for switches, ports, and FCIP tunnels also
displays in the IP Historical Graph/Tables dialog box. If available, click the IP tab, then select Monitor
> Performance > Historical Graphs/Tables.
Disabling historical performance collection
Perform the following steps to disable historical performance collection on all fabrics:
1. Select Monitor > Performance > Historical Data Collection
2. Select Disable All.
Historical performance data collection is disabled for all fabrics in the SAN.
Generating and saving a historical performance graph
The Historical Performance Graph is available through the SAN tab or through the IP tab if you
select SAN devices. If selecting through the IP tab, refer to
display"
To generate a historical performance graph for a device, complete the following steps.
1. Select the device for which you want to generate a performance graph.
2. Select Monitor > Performance > Historical Graph.
Brocade Network Advisor SAN User Manual
53-1002696-01
discovered fabrics to the Selected table.
Historical performance data collection is enabled for all selected fabrics.
The Fabric Selector dialog box displays.
on page 936.
The Historical Performance Graph dialog box displays.
SAN Historical performance data
"Configuring the performance graph
29
909