Brocade Communications Systems StoreFabric SN6500B User Manual page 1031

3. Select the SAN, IP, or Hosts tab. Depending on the tab selected, the products available to
4. Enter a unique name for the trap filter in the Filter Name field.
5. Enter a general description of the trap filter in the Description field.
6. Click the Forward Application Messages check box to forward application events.
7.
8. Select a severity level from the Severity list. The severity level can be one of the following, and
Brocade Network Advisor SAN User Manual
53-1002696-01
FIGURE 424 Add Trap Filter dialog box
which you can add a trap filter display in the Available Products list.
Click the Forward pseudo events check box to forward pseudo events.
appear in descending order of severity.
•
Emergency
•
Alert
•
Critical
•
Error
•
Warning
•
Notice
•
Info
•
Debug
Traps with the selected severity and those with higher severity levels are forwarded. For
example, by default, Critical severity is selected. Therefore, traps with Critical, Alert, and
Emergency severity levels are forwarded. To have all traps forwarded, select Debug, the lowest
severity level.
32
SNMP traps
983