Creating A Local Ca - Brocade Communications Systems StoreFabric SN6500B User Manual

20
Steps for connecting to a KMIP appliance (SafeNet KeySecure)

Creating a local CA

1. From the KeySecure Management Console, select the Security tab, then select CAs & SSL
FIGURE 207
2. Under Create Local Certificate Authority, enter the organization information in the fields
3. Verify the Local CA status is shown as Active.
FIGURE 208
576
Certificates > Local CAs.
The Certificate and CA Configuration page displays
KeySecure Certificate and CA Configuration - Create Local Certificate Authority
provided, then click Create. (The example is using "SafeNetCA" as the Local CA name.)
The new Local CA is listed in the Local Certificate Authority List table
KeySecure Certificate and CA Configuration - Local Certificate Authority List
(Figure 207).
(Figure 208).
Brocade Network Advisor SAN User Manual
53-1002696-01