Brocade Communications Systems StoreFabric SN6500B User Manual page 530

16
FCoE login groups
3. Select an existing switch from the Switch list, or enter the WWN of the switch that will be added
4. Select one of the following Login Members options:
5. Select one of the following Available Member options:
6. Select available members from the Products/Ports list and click the right arrow button to move
7.
8. Review the changes carefully before you accept them.
9. Click Start to apply the changes, or click Close to abort the operation.
482
FIGURE 169
Add Login Group dialog box
to the FCoE login group.
•
Allow all—Click to allow all login members into the Available Members list.
•
Allow specific—Click to allow specific login members into the Available Members list. If you
select this option, you can add specific login members using the options in the Available
Members area.
•
Port WWN—Click to enter the world wide name (WWN) of the port to associate with the
selected switch. The member port WWN text field allows a maximum of 16 digits.
•
Managed CNAs—Click to show a list of products and ports which can be selected as login
group members.
the available members to the Selected Members list.
Click OK.
The FCoE Login Group Confirmation and Status dialog displays.
On closing the FCoE Login Group Confirmation and Status dialog box, the FCoE Configuration
Dialog refreshes the data and the latest information is displayed.
Brocade Network Advisor SAN User Manual
53-1002696-01