Modifying A Boot Lun Zone; Deleting A Boot Lun Zone; Zoning Administration - Brocade Communications Systems StoreFabric SN6500B User Manual

The Boot LUN zone is saved to the Active Zone DB. To activate the Boot LUN zone, you must move it
to a zone configuration and activate the configuration.

Modifying a Boot LUN zone

Only one Boot LUN zone can exist for a host port. If you want to change the target port or LUN
number, you must create a new Boot LUN zone and overwrite the existing zone.
1. Select Configure > Zoning > Fabric.
2. Click the Zone DB tab if that tab is not automatically displayed.
3. Select a fabric from the Zoning Scope list.
4. Right-click the Boot LUN zone you want to modify in the Zones list and select New Boot LUN
5. Select a storage port WWN from the list or enter an offline WWN.
6. Enter a 16-digit hexadecimal LUN number in the LUN # field.
7.
8. Click OK or Apply to save your changes.
9. Click Yes.

Deleting a Boot LUN zone

Boot LUN zones are deleted the same way that standard zones are deleted. Refer to
zone"

Zoning administration

This section provides instructions for performing administrative functions with zoning. You can
rename, duplicate, delete, and perform other tasks on zone members, zones, and zone
configurations.
Brocade Network Advisor SAN User Manual
53-1002696-01
The Zoning dialog box displays.
This identifies the target entity for all subsequent zoning actions and displays the zoning
database for the selected entity.
Zone.
The New Boot LUN Zone dialog box displays. You can modify the storage port WWN and LUN
number.
You can click the ellipsis button to display and select the storage port WWNs from a device tree
with storage group.
Click Generate.
A message displays that a Boot LUN zone already exists and asks whether you want to
overwrite the existing zone.
The existing Boot LUN zone is replaced by the version you just created.
on page 722 for instructions.

Zoning administration

"Deleting a
21
749