Editing The Hp Lan Call Home Center - Brocade Communications Systems StoreFabric SN6500B User Manual

13. Click OK.
14. Click OK to close the Call Home dialog box.

Editing the HP LAN Call Home center

To edit an HP LAN Call Home center, complete the following steps.
1. Select Monitor > Event Notification > Call Home.
2. Select the HP LAN Call Home center you want to edit in the Call Home Centers list.
3. Click Edit Centers (beneath the Call Home Centers list).
4. Make sure the HP LAN Call Home center type displays in the Call Home Centers list.
5. Select the Enable check box to enable this Call Home center.
6. Enter the IP address of the Call Home center in the Service Gateway field.
The default is 2069.
7.
Brocade Network Advisor SAN User Manual
53-1002696-01
The Call Home dialog box displays with the Call Home center you edited highlighted in the Call
Home Centers list.
The Call Home dialog box displays.
The Configure Call Home Center dialog box displays
FIGURE 55 Configure Call Home Center dialog box (HP LAN option)
If the Call Home center type is incorrect, select the correct type from the list.
Enter the port number of the Call Home center in the Port field.
Editing a Call Home center
(Figure 55).
7
179