Boot Image Repository - Brocade Communications Systems StoreFabric SN6500B User Manual

15
Adapter software
2. Click Import on the Driver Repository dialog box.
3. Locate the driver file using one of the following methods:
4. Click Open.
5. Click OK.
Deleting a driver file from the repository
1. Select one or more driver files from the Available Driver Files list on the Driver Repository
2. Click Delete.

Boot image repository

The boot code image stored in the adapter's flash memory contains the instructions that enable
the server to locate the boot disk in SAN. The boot code image contains the basic input/output
system (BIOS), extensible firmware interface (EFI), and open firmware which enable the adapters to
be compatible with any system platform.
414
FIGURE 141 Driver Repository dialog box
The Import Driver Repository dialog box displays.
•
Search for the file you want from the Look In list.
•
Enter the name of the image file you want to import in the File Name field.
After the import completes, you see a message that the driver imported successfully.
dialog box.
The driver file is removed from the Driver Repository dialog box.
NOTE
Windows drivers (.exe files) cannot be imported into the server repository when the
Management application server is running on Linux or Solaris platforms.
Brocade Network Advisor SAN User Manual
53-1002696-01