Creating A Vlan Classifier Group; Deleting A Vlan Classifier Group - Brocade Communications Systems StoreFabric SN6500B User Manual

16
VLAN classifier configuration

Creating a VLAN classifier group

You can assign existing rules to a selected VLAN classifier and form a VLAN classifier group. If no
rules are available, you can add rules to a selected switch using the Add Rules dialog box.
1. Select Configure > DCB from the menu bar.
2. Select a switch and click Edit.
3. Click the VLAN Classifiers tab on the Edit Switch dialog box.
4. Select a classifier ID from the VLAN Classifier list. Values range from 1 through 16.
5. Click the Add button under the VLAN Classifier list.
6. Select the classifier from the VLAN Classifier list and then select the rules you want to add
7.
8. When you have finished the configuration, click OK to launch the Deploy to Products dialog

Deleting a VLAN classifier group

1. Click the VLAN Classifiers tab on the Edit Switch dialog box.
2. Select a classifier from the VLAN Classifiers list.
3. Click Delete.
4. When you have finished the configuration, click OK to launch the Deploy to Products dialog
466
The DCB Configuration dialog box displays, showing the status of all DCB-related hardware and
functions.
The Edit Switch dialog box, VLAN Classifiers tab displays.
The classifier with the selected ID is displayed in the VLAN Classifier list.
under this classifier from the VLAN Classifier Rules list.
•
If no rules are available, the following error message displays: "No rules are available on
this switch. Choose Add under the Available Rules list to add rules to this switch."
•
If no classifier group IDs are available, the list is disabled.
Click the right arrow button.
The selected rules are assigned to the selected VLAN classifier ID in the VLAN Classifier list.
box.
The Edit Switch dialog box, VLAN Classifiers tab displays.
The VLAN classifier group is deleted.
box.
Brocade Network Advisor SAN User Manual
53-1002696-01