Saving A Master Key To A Key Vault - Brocade Communications Systems StoreFabric SN6500B User Manual

20
Master keys
FIGURE 312
4. Select File as the Backup Destination.
5. Enter a file name, or browse to the desired location.
6. Enter the passphrase, which is required for restoring the master key. The passphrase can be
7.
ATTENTION
Save the passphrase. This passphrase is required if you ever need to restore the master key from
the file.

Saving a master key to a key vault

Use the following procedure to save the master key to a key vault.
1. Select Configure > Encryption from the menu task bar to display the Encryption Center
2. Select a group from the Encryption Center Devices table, then select Group > Security from the
3. Select Backup Master Key as the Master Key Action.
672
Backup Destination (to file) dialog box
between eight and 40 characters, and any character is allowed.
Re-enter the passphrase for verification, then click OK.
dialog box (Refer to Figure 185
menu task bar.
The Encryption Group Properties dialog box displays with the Security tab selected.
The Backup Master Key for Encryption Group dialog box displays
on page 526).
(Figure 313).
Brocade Network Advisor SAN User Manual
53-1002696-01