Registering Authentication Cards From The Database - Brocade Communications Systems StoreFabric SN6500B Administrator's Manual

Registering authentication cards from the database

Smart cards that are already in the Management program's database can be registered as
authentication cards.
1. Select Configure > Encryption from the menu task bar to display the Encryption Center
2. Select an encryption group from the Encryption Center Devices table, then select Group >
FIGURE 4
3. Click Register from Archive.
FIGURE 5
4. Select a card from the table, then click OK.
5. Wait for the confirmation dialog box indicating initialization is done, then click OK.
Fabric OS Encryption Administrator's Guide (SKM/ESKM)
53-1002721-01
dialog box (Refer to Figure 1
Security from the menu task bar to display the Encryption Group Properties dialog box. The
Security tab is selected (Figure
Encryption Group Properties dialog box - Security tab
The Authentication Cards dialog box displays
in the database.
Authentication Cards dialog box - registering smart cards from archive
The card is added to the Registered Authentication Cards table.
on page 14).
4).
(Figure 5). The table lists the smart cards that are
Smart card usage
2
19