Brocade Communications Systems StoreFabric SN6500B User Manual page 540

17
Layer 2 access control list management
4. To edit an existing ACL rule, complete the following steps.
5. To add a new ACL rule, complete
6. To delete an existing ACL rule, select the rule you want to edit in the ACL Entries list and click
7.
8. Click OK on the Device_Name - Layer 2 ACL Configuration dialog box.
Creating an extended Layer 2 ACL configuration (Fabric OS)
To create an extended Layer 2 ACL configuration on a Fabric OS device, complete the following
steps.
1. Select the device and select Configure > Security > Layer 2 ACL > Product.
2. Select New from the Add list.
3. Select Extended from the Type list.
4. Enter a name for the ACL in the Name field.
492
a. Select the rule you want to edit in the ACL Entries list and click the left arrow button.
b. Complete step 5 through
OS)" on page 490.
The updated ACL entry displays in the ACL Entries list. To edit additional ACL entries,
repeat step 4.
configuration (Fabric OS)"
The new ACL entry displays in the ACL Entries list. To add additional ACL entries, repeat
the left arrow button.
Click OK on the Duplicate - Layer 2 ACL Configuration dialog box.
The new ACL configuration displays in the ACLs list. To copy additional ACLs, repeat
through step 10.
The Deploy to Products - Layer 2 ACL dialog box displays. To save the configuration, refer to
"Saving a security configuration deployment"
The Device_Name - Layer 2 ACL Configuration dialog box displays.
The Device_Name - Layer 2 ACL Configuration dialog box displays.
FIGURE 173 Device_Name
step 9 in "Creating a standard Layer 2 ACL configuration (Fabric
step 4 through step 9
on page 490.
on page 500
- Layer 2 ACL Configuration (Extended) dialog box
in "Creating a standard Layer 2 ACL
Brocade Network Advisor SAN User Manual
step 5.
step 2
53-1002696-01