Disabling Fabric Tracking; Accepting Changes For A Fabric - Brocade Communications Systems StoreFabric SN6500B User Manual

2. Click Yes to accept changes.

Disabling fabric tracking

1. Disable fabric tracking by choosing one of the following options:
2. Click Yes.

Accepting changes for a fabric

1. Accept the changes to a fabric by choosing one of the following options:
Brocade Network Advisor SAN User Manual
53-1002696-01
•
Device Ports—This table shows a brief summary of the device ports including status
(whether the device port will be added (
type, port, port WWN, node WWN, and attached port number.
•
Connections—This table shows a brief summary of the switch connections including the
status (whether the device port will be added (
connection type as well as the WWN, domain ID, IP address, and port number of the
connected switches.
•
Select the fabric on which you want to disable fabric tracking on the Product List or
Connectivity Map and select Monitor > Track Fabric Changes.
•
Right-click the fabric on which you want to disable fabric tracking on the Product List or
Connectivity Map and select Track Fabric Changes.
The Accept Changes Summary dialog box displays. This dialog box includes the following
information:
•
Do not show me this again check box—Select if you do not want to see this dialog box
again when you enable or disable fabric tracking or accept changes for a switch or fabric.
•
Fabric Name—Displays the name of the selected fabric.
•
Switches—This table shows a brief summary of the switches including status (whether the
device port will be added (
and domain ID. This table includes unmonitored switches which becomes segmented from
the fabric.
•
Device Ports—This table shows a brief summary of the device ports including status
(whether the device port will be added (
type, port, port WWN, node WWN, and attached port number.
•
Connections—This table shows a brief summary of the switch connections including the
status (whether the device port will be added (
connection type as well as the WWN, domain ID, IP address, and port number of the
connected switches.
•
Select a fabric on the Product List or Connectivity Map and select Monitor > Accept
Changes.
•
Right-click a fabric on the Product List or Connectivity Map and select Accept Changes.
The Accept Changes Summary dialog box displays. This dialog box includes the following
information:
•
Do not show me this again check box—Select if you do not want to see this dialog box
again when you enable or disable fabric tracking or accept changes for a switch or fabric.
) or removed (
) or removed (
) or removed ( ) from the fabric), name, IP address, WWN,
) or removed (
) or removed (
5
Fabric tracking
) from the fabric), device
) from the fabric) and
) from the fabric), device
) from the fabric) and
133