7.
8. When you are finished, click OK. The Traffic Isolations Zones window displays.
9. Click Apply to save the TI zone configuration.
Zone configuration and zoning database management
A zone configuration is a group of zones; zoning is enabled on a fabric by enabling a specific
configuration. You can specify members of a configuration using zone names.
Figure 38
zones, and zoning configuration. The database contains one zoning configuration, myconfig, which
contains two zones: Zone A and Zone B. The database also contains four aliases, which are
members of Zone A and Zone B. Zone A and Zone B also have additional members other than the
aliases.
FIGURE 38
Creating zone configurations
Use the following procedure to create a zone configuration. After creating a zone configuration, you
must explicitly enable it for it to take effect.
For information on enabling the configuration, refer to
Web Tools Administrator's Guide
53-1001772-01
DRAFT: BROCADE CONFIDENTIAL
Optional: Repeat steps 5 and 6 to add more elements to your TI zone.
displays a sample zoning database and the relationship between the zone aliases,
Zone Configuration: myconfig
Zone A
Alias 1
WWN 1; WWN 2; WWN 3
Other Elements
<domain, portarea>
Zone B
Alias 3
WWN 5
Other Elements
WWW 9
Sample zoning database
Zone configuration and zoning database management
Alias 2
WWN 4; <domain, portarea>
Alias 4
WWW 5; WWN 6; WWN7
"Enabling zone configurations"
9
on page 134.
131