Encryption Preparation - Brocade Communications Systems StoreFabric SN6500B User Manual

9. Enter the Backup Password in the field provided, then click Restore.
10. After the certificate is restored to the secondary node from the previously backed-up primary
FIGURE 229
11. Under Restart/Halt, select Restart, then click Commit and wait until the restart is completed.

Encryption preparation

Before you use the encryption setup wizard for the first time, you should have a detailed
configuration plan in place and available for reference. The encryption setup wizard assumes the
following:
•
•
•
•
•
•
Brocade Network Advisor SAN User Manual
53-1002696-01
node, select Maintenance > Services.
The Services Configuration page displays
NOTE
A message displays, advising that the secondary node requires a restart.
KeySecure Services Configuration page
The primary and second KeySecure nodes are now in a cluster and active for use.
You have a plan in place to organize encryption devices into encryption groups.
If you want redundancy and high availability in your implementation, you have a plan to create
high availability (HA) clusters of two encryption switches or blades to provide failover support.
All switches in the planned encryption group are interconnected on an I/O synch LAN.
The management ports on all encryption switches and 8-slot Backbone Chassis CPs that have
encryption blades installed, have a LAN connection to the SAN management program and are
available for discovery.
A supported key management appliance is connected on the same LAN as the encryption
switches, 8-slot Backbone Chassis CPs, and the SAN Management program.
An external host is available on the LAN to facilitate certificate exchange.
Encryption preparation
(Figure 229).
20
591