Performance Data Aging tab
Performance data samples are collected at regular intervals. The Performance Data Aging tab
enables you to define the performance data collection interval for product and port measures.
NOTE
Changes to the performance data aging option requires a server restart.
NOTE
You can only restart the server using the Server Management Console (Start > Programs >
Management_Application_Name 12.X.X > Server Management Console).
Defining the performance data aging interval
To define the performance data collection interval, complete the following steps.
1. Click the Performance Data Aging tab.
2. Select one of the following options:
Brocade Network Advisor SAN User Manual
53-1002696-01
FIGURE 114
Performance Data Aging tab
•
Option 1—2 years data with the following samples
Raw samples for the last 1 day
30 minutes granularity for last 3 days (144 samples)
2 hours granularity for last 30 days (360 samples)
1 day granularity for last 2 years (730 samples)
If you change from Option 1 to Option 2, you will lose existing performance data for the
following intervals:
30 minutes granularity for last 3 days (144 samples)
2 hours granularity for last 30 days (360 samples)
Performance Data Aging tab
11
309