Brocade Communications Systems StoreFabric SN6500B User Manual page 700

20
Adding target disk LUNs for encryption
FIGURE 296
4. Select the target port from the Target Port table, then click Next.
FIGURE 297
652
Select Target Port dialog box
The dialog box is used to select a target port when configuring multiple I/O paths to a disk LUN.
The dialog box contains the following information:
•
Storage Array The Storage Array selected from the LUN view prior to launching the Add
:
New Path wizard.
•
Host: The host selected from the LUN view prior to launching the Add New Path wizard.
•
Target Port table: Lists target ports using the following identifiers:
•
Target Port
•
Target Port Name
•
Fabric
•
Container Name
The Select Initiator Port dialog box displays
Select Initiator Port dialog box
(Figure 297).
Brocade Network Advisor SAN User Manual
53-1002696-01