Adding An Invalid Words Threshold - Brocade Communications Systems StoreFabric SN6500B User Manual

24
Adding thresholds
8. Click OK to add the Invalid CRCs threshold to the table and close the Add Invalid CRCs
9. Click OK on the Port Fencing dialog box.

Adding an Invalid Words threshold

NOTE
This threshold is only available for Fabric OS devices.
NOTE
This feature requires a Trial or Licensed version.
Use to block a port when the Invalid Words violation type meets the Fabric OS switch threshold. For
default threshold values for Fabric OS devices, refer to Chapter 7 of the Fabric Watch
Administrator's Guide.
To add an Invalid Words threshold, complete the following steps.
1. Select Monitor > Fabric Watch > Port Fencing.
2. Select Invalid Words (Fabric OS only) from the Violation Type list.
3. Click Add.
4. Enter a name for the threshold in the Name field.
5. Select one of the following options:
6. Enter the number of invalid words allowed for the threshold in the Threshold errors field.
7.
816
Threshold dialog box.
To assign this threshold to fabrics, switches, or switch ports, refer to
page 821.
The Port Fencing dialog box displays.
The Add Invalid Words Threshold dialog box displays.
FIGURE 369
Add Invalid Words Threshold dialog box
•
Default — Uses device defaults. Go to
•
Custom — Uses your selections. Continue with
Select the time period for the threshold from the errors per list. The following choices are
available:
•
None — the port is blocked as soon as the specified number of invalid words allowed is
met.
•
Second — the port is blocked as soon as the specified number of invalid words allowed is
reached within a second.
step 8.
step 6.
Brocade Network Advisor SAN User Manual
"Assigning thresholds" on
53-1002696-01