Brocade Communications Systems StoreFabric SN6500B User Manual page 385

3. Source Location, which allows you to select the location of the configuration you wish to
4. Source Configuration, which allows you to select the source switch to replicate. For more
5. Destination Switches, which allows you to select the destination switch. For more information
6. Validation, which lists the configuration settings that you can validate before you replicate. For
7.
To proceed to the next step in the wizard, click Next. To return to the previous screen, click Previous.
TABLE 38
Field/Component
All FC option
Partial FC option
All DCB option
TABLE 39
Field/Component
Configuration Repository option
Configuration from the switch option
File in text format option
Brocade Network Advisor SAN User Manual
53-1002696-01
replicate. For more information about the fields and components of this step, refer to
on page 337.
information about the fields and components of this step, refer to
about the fields and components of this step, refer to
more information about the fields and components of this step, refer to
Summary, which lists the replication settings that successfully ran on all the selected
destination switches. For more information about the fields and components of this step, refer
to Table 43 on page 340.
Step 2. Configuration Type
Step 3. Source Location
Configuration repository management
Table 41
Description
Replicates the entire configuration, including security settings.
Warning: This is a disruptive operation and selected destination
switches will be disabled prior to downloading the configuration.
Replicates a part of the FC configuration. Select one of the following
options:
•
Fabric Watch option — Lists switches with Fabric Watch
configurations that you can replicate.
•
SNMP option — Lists switches with SNMP configurations that you
can replicate.
Include system group configuration check box — Select to include
the SNMP system group configuration in the replication.
•
Trace Destinations option — Lists switches with trace destination
configurations that you can replicate.
Warning: This is a disruptive operation and selected destination
switches will be disabled prior to downloading the configuration.
Replicates the entire DCB startup configuration.
Description
Select to replicate the entire configuration repository to the destination
switches.
Select to assign a designated switch to the destination switch.
Select to choose a valid configuration file from the local file system by
either typing in the complete path of the file in the text box or selecting
the file using the Browse option on the Source Configuration screen.
Table 39
Table 40 on page 338.
on page 339.
Table 42 on page 340.
12
337