Registering A Scom Server; Editing A Scom Server - Brocade Communications Systems StoreFabric SN6500B User Manual

10
Microsoft System Center Operations Manager (SCOM) plug-in
SCOM plug-in requirements
•
•
•
•
•
•
•

Registering a SCOM server

To register the SCOM server, complete the following steps.
1. Select Tools > Plug-in for SCOM.
2. Click Add.
3. Enter an IP address or fully qualified domain name for the SCOM host in the Host field.
4. Enter the domain name in the Domain field.
5. Enter your user ID and password.
6. Click OK.
7.

Editing a SCOM server

To edit the SCOM server, complete the following steps.
1. Select Tools > Plug-in for SCOM.
2. Select the server you want to edit and click Edit.
286
Make sure you import the Management application management pack
(Management_Application_Name.FabricView.xml) to the SCOM Server prior to registering the
SCOM Plug-in. The management pack is located in the following directory on the DVD
scom/OEM_Name.
Make sure the Management application server host is managed by the SCOM Server in agent
managed mode.
Make sure the SCOM HealthService agent is running on the Management application server.
Make sure you install the SCOM Console 2007 R2 software on the Management application
server.
(Optional) Enable SSL on the Management_Application_Name to use HTTPS Communication
between SCOM Console and the Management application.
Make sure that the fabric or switch is managed by the the Management application to view
fabric and switch details.
Make sure to enable performance monitoring at the SAN or fabric level to collect -end monitor
statistics. Refer to "SAN End-to-end monitoring"
The Plug-in for SCOM dialog box displays.
The Add SCOM Server dialog box displays.
The Management application accepts IP addresses in IPv4 and IPv6 formats. The IPv4 format
is valid when the operating system has IPv4 mode only or dual stack mode. The IPv6 format is
valid when the operating system has IPv6 mode only or dual stack mode.
Click Close.
The Plug-in for SCOM dialog box displays.
The Edit SCOM Server dialog box displays. The Host field is not editable in the Edit SCOM
Server dialog box.
on page 915.
Brocade Network Advisor SAN User Manual
53-1002696-01