Configuring Key Vault Settings For Rsa Data Protection Manager (Dpm) - Brocade Communications Systems StoreFabric SN6500B User Manual

8. Select the Key Vault Type. Configuration options vary based on the key vault type you choose.

Configuring key vault settings for RSA Data Protection Manager (DPM)

The following procedure assumes you have already configured the initial steps in the Configure
Switch Encryption wizard. If you have not already done so, go to
on page 592.
Figure 235
Brocade Network Advisor SAN User Manual
53-1002696-01
•
Backup Certificate File: (Optional.) If a backup key vault is entered, the backup certificate
file must also be entered. Navigate to and select the secondary public key certificate from
your desktop, if applicable.
•
Serial Number: (TKLM only.) Serial number of the switch, which is required for registering
the switch on the key vault.
•
Device Group: (TKLM only.) The name of the device group of which the switch is a member.
This information is required for registering the switch on the key vault.
To complete the wizard steps, proceed to the section that describes your particular key vault
type.
-
For DPM key vault setting instructions, see
Protection Manager (DPM)"
-
For LKM/SSKM key vault setting instructions, see
NetApp Link Key Manager (LKM/SSKM)"
-
For ESKM/SKM key vault setting instructions, see
Enterprise Secure Key Manager (ESKM/SKM)"
-
For TEKA key vault setting instructions, see
e_Security keyAuthority (TEKA)"
-
For TKLM key vault setting instructions, see
Key Lifetime Manager (TKLM)"
-
For KMIP key vault setting instructions, see
Management Interoperability Protocol (KMIP)"
shows the key vault selection dialog box for DPM.
Creating a new encryption group
"Configuring key vault settings for RSA Data
on page 597.
"Configuring key vault settings for
on page 604.
"Configuring key vault settings for HP
on page 609.
"Configuring key vault settings for Thales
on page 613.
"Configuring key vault settings for IBM Tivoli
on page 619.
"Configuring key vault settings for Key
on page 623.
"Creating a new encryption group"
20
597