Brocade Communications Systems StoreFabric SN6500B User Manual page 1068

32
Pseudo events
12. You can either select an existing CLI configuration or create a new one and select that
13. Select the Deploy Product Configuration check box if you want to deploy a payload to the
14. Select the Apply as a Logging Policy check box to indicate whether or not you want the event
15. Click Next to advance to the Summary pane.
16. Click Finish.
For more information about adding an event action, refer to
1020
configuration. After selecting a CLI configuration, the name of the CLI configuration is
displayed in the Selected Configuration field.
-
Has Parameters - Displays Yes if the CLI configuration has parameters that require values
to be entered before it can be deployed, and displays No if no parameter needs to be
defined.
-
The Parameters list lists the parameters that need to be defined in the configuration.
•
The Parameter column displays the parameter and its variables in the CLI
configuration.
•
The Source column lists the appropriate SNMP attributes for the parameters. Each
attribute contains a specific parameter value, such as an IP address. Select the
attribute you want from the list.
•
The Transformation column uses the product IP addresses and MAC addresses listed
in the Address Finder. If the Address Finder list is empty, the product or port will not be
found. From this column, specify what you want Event Processor to do with the value
in the attribute:
Find Device: Find the product with the IP address in the attribute and deploy the CLI
configuration to that product.
Find Port: Find the port on a product with the IP address in the attribute and deploy
the CLI configuration to that port.
Find Intruder MAC: Find the product with the IP address in the attribute that matches
the intruder MAC address and deploy the CLI configuration to that product.
None: The Event Processor only reports occurrence of the products.
products if the policy criteria have been met.
occurrence to be logged in the Management application database:
•
Select Log to log the occurrence in the Management application database.
•
Select Drop to not log the occurrence in the Management application database.
"Event action definitions"
Brocade Network Advisor SAN User Manual
on page 996.
53-1002696-01