Editing Host Adapter Credentials - Brocade Communications Systems StoreFabric SN6500B User Manual

8. Configure discovery authentication by choosing one of the following options:
9. Enter the port number in the Port field.
10. Enter your username in the User ID field.
11. Enter your password Password field.
12. Click OK on the Add Host Adapters dialog box.
13. Click Close on the Discover Host Adapters dialog box.

Editing Host adapter credentials

To edit Host credentials, complete the following steps.
1. Select Discover > Host Adapters.
2. Select the Host in the Discovered Hosts list and click Edit.
3. Configure Host credentials by choosing one of the following options:
Brocade Network Advisor SAN User Manual
53-1002696-01
•
To configure CIM server credentials, select the CIM server (ESXi only) option. Continue
with step 8.
If you do not need to configure Host credentials, skip to
•
To configure discovery with authentication, select the HTTPS from the Protocol list.
•
To configure discovery without authentication, select the HTTP from the Protocol list.
HCM agent default is 34568. CIM server HTTPS default is 5989. CIM server HTTP default is
5988.
HCM agent default is admin. Leave this field blank for the CIM server.
HCM agent default is password. Leave this field blank for the CIM server.
If an error occurs, a message displays. Click OK to close the error message and fix the problem.
A Host Group displays in Discovered Hosts table with pending status. To update the status from
pending you must close and reopen the Discover Host Adapters dialog box.
The Discover Host Adapters dialog box displays.
The Edit Host Adapters dialog box displays.
FIGURE 17
Edit Host Discovery dialog box
•
To configure HCM agent credentials, select the HCM agent option. Go to
•
To configure CIM server credentials, select the CIM server (ESXi only) option. Continue
with step 4.
If you do not need to configure Host credentials, skip to
Host discovery
step 12.
step
step 8.
4
5.
65