5
Software Configuration
6. Click Apply or OK to save your work.
7.
Configuring asset polling
Asset polling allows you set the length of time between state change polling. To maximize the
efficiency of the polling feature (balance the amount of possible information with any possible
performance impact), base your settings on the size of the SAN.
To configure asset polling, complete the following steps.
1. Select Server > Options.
2. Select Memory Allocation in the Category list to set the memory allocation for the server and
120
•
Enterprise Medium : 1500 MB
•
Enterprise Large : 2048 MB
Default values for SAN only Server
Server Heap Size
For a 32-bit Windows or Linux Server
•
Small : 768 MB
•
Medium : 950 MB
•
Large : 950 MB
For a 64-bit Windows or Linux Server
•
Small : 1024 MB
•
Medium : 1500 MB
•
Large : 2048 MB
NOTE
There is no restriction on the maximum value for Server Heap Size in a 64-Bit Server. The
correct server heap size value must be given according to the RAM present in the server.
NOTE
Changes to this option take effect after an application restart.
NOTE
You can only restart the server using the Server Management Console (Start > Programs >
Management_Application_Name 12.X.X > Server Management Console).
Click OK on the "changes take effect after application restart" message.
The Options dialog box displays.
client.
The Memory Allocation pane displays.
Brocade Network Advisor SAN User Manual
53-1002696-01