Creating An Event Action With A Pseudo Event On The Flapping Policy - Brocade Communications Systems StoreFabric SN6500B User Manual

9. Click Next to advance to the Summary pane.
10. Click Finish to complete the pseudo event configuration.

Creating an event action with a pseudo event on the flapping policy

1. Select Monitor > Event Processing > Event Actions.
2. Click Add to display the Identification pane of the Add Event Action dialog box.
3. Enter a name and description for the event action and click the Enabled check box to enable
4. Click Next to display the Events pane.
5. Select the Pseudo Events event type from the Show list.
6. Select the pseudo event you created and click Next.
7.
8. Click Next to advance to the Policy pane of the Add Event Action dialog box.
9. Click the Take actions for the selected events when they occur button if you want to take action
10. Click Next to advance to the Action Group-Actions pane of the Add Event Action dialog box.
11. Select the Deploy CLI Configuration check box and click the Configure button if you want to
Brocade Network Advisor SAN User Manual
53-1002696-01
Now, you must create a new event action definition using the Add Event Actions dialog box.
The Event Actions dialog box displays.
the event.
By default, the Events pane of the Add Event Action dialog box displays.
The available pseudo events display.
The Sources pane of the Add Event Action dialog box displays.
Select the source that you will use to monitor this event from the Selected Sources list.
The Policy pane of the Add Event Action dialog box displays.
for the selected events when they occur.
The Action Group-Actions pane of the Add Event Action dialog box displays.
deploy a configuration from CLI Configuration Manager to products if the policy criteria have
been met.
NOTE
If the CLI configuration you chose from CLI Configuration Manager contains a non-Brocade
product as a target, the configuration will not be deployed to the non-Brocade product.
32
Pseudo events
1019