16
VLAN classifier configuration
4. Click the Add button under the Available Rules list.
5. Keep the rule ID number as it is, or change the number using a value from 1 through 256.
6. Select a rule type. Valid rule types are MAC (MAC address-based rule) and Proto (802.1Q
7.
8. Select an encapsulation type from the list. Options include Ethv2, nosnapllc, and snapllc. The
464
FIGURE 158
Edit Switch dialog box, VLAN Classifiers tab
The Add Rules dialog box displays, as shown in
FIGURE 159
Add Rules dialog box
The Rule ID field is pre-populated with the next available rule ID number.
protocol-based rule).
If Ethernet Type is selected as the protocol rule type, enter any valid four-digit hexadecimal
value within the allowed range of 0x0000 through 0xFFFF. For the other Proto options, the hex
ID value is hard-coded as follows:
•
ARP—0x0808
•
IP—0x8881
•
IPv6—0x86DD
Encapsulation list only accepts a value when Protocol is selected as the rule type.
Figure
159.
Brocade Network Advisor SAN User Manual
53-1002696-01