Exporting And Registering The Switch Kac Certificates On Lkm/Sskm; Launching The Netapp Datafort Management Console - Brocade Communications Systems StoreFabric SN6500B User Manual

5. If you are using the Management application, the path to the file must be specified ion the

Exporting and registering the switch KAC certificates on LKM/SSKM

1. Select Configure > Encryption from the menu task bar to display the Encryption Center
2. Select a switch from the Encryption Center Devices table, then select Switch > Export
FIGURE 196
3. Select Signed switch certificate (X.509), which allows you to export a signed switch certificate
4. Click OK.
5. Register the signed KAC certificate that you exported from the member node with the NetApp

Launching the NetApp DataFort Management Console

The NetApp DataFort Management Console (DMC) must be installed on your PC or workstation to
complete certain procedures described in this chapter. Refer to the appropriate DMC product
documentation for DMC installation instructions. After you install the DMC, complete the following
steps:
1. Launch the DMC.
2. Click the Appliance tab on the top panel.
3. Add the NetApp LKM/SSKM appliance IP address or hostname.
4. Right-click the added IP address and log in to the NetApp LKM/SSKM key vault.
Brocade Network Advisor SAN User Manual
53-1002696-01
Select Key Vault dialog box when creating a group leader. If the proper path is entered, the file
is imported.
dialog box (Refer to Figure 185
Certificate from the menu task bar.
The Export Switch Certificate dialog box
certificate signing request (CSR) to a location you specify. The procedures for submitting a CSR
for signing are determined by the Certificate Authority (CA).
The CSR must be submitted to a Certificate Authority CA for signing, then imported into the
switch and the key vault. The signed switch certificate may be imported directly by a key vault.
Export switch certificate dialog box
to a location of your choosing. The default location is My Documents on your client PC. In most
cases, this certificate file should be in privacy email (.pem) format.
You are prompted to save the CSR, which can be saved to your SAN Management Program
client PC, or an external host of your choosing.
LKM/SSKM appliance.
Steps for connecting to an LKM/SSKM appliance
on page 526).
(Figure 196) allows you to export a switch public key
20
551