Displaying Vlans In The Vlan View - Brocade Communications Systems StoreFabric SN6500B User Manual

26
VLAN Manager

Displaying VLANs in the VLAN view

The VLAN View tab displays all the VLANs discovered on the network and lists them by VLAN IDs
(Figure
To view the VLANs or products in the VLAN View tab, complete the following steps.
1. Click the VLAN View tab in the VLAN Manager dialog box.
2. Expand the folder under the VLAN View tab, then double-click a super-aggregated VLAN to
856
382).
FIGURE 382
VLAN Manager dialog box - VLAN View tab
display its port VLANs or Products.
VLANs are listed by their topologically distinct broadcast domains. A VLAN that is listed several
times means that the products on which the VLAN has been configured cannot communicate
with each other. Either they are not physically connected or FDP or LLDP is not enabled on
these products. If FDP or LLDP is enabled, then each VLAN lists the products in that broadcast
domain.
Brocade Network Advisor SAN User Manual
53-1002696-01