Configuring key vault settings for IBM Tivoli Key Lifetime Manager
(TKLM)
The following procedure assumes you have already configured the initial steps in the Configure
Switch Encryption wizard. If you have not already done so, go to
on page 592.
Figure 261
FIGURE 261
1. Enter the IP address or host name for the primary key vault.
2. Enter the name of the file that holds the primary key vault's public key certificate or browse to
3. If you are using a backup key vault, enter the IP address or host name, and the name of the file
4. Click Next.
Brocade Network Advisor SAN User Manual
53-1002696-01
shows the key vault selection dialog box for TKLM.
Select Key Vault dialog box for TKLM
the desired location.
holding the backup key vault's public key certificate in the fields provided.
The Specify Master Key Certificate File Name dialog box displays
Creating a new encryption group
"Creating a new encryption group"
(Figure
263).
20
619