Product Communication Settings - Brocade Communications Systems StoreFabric SN6500B User Manual

5
Software Configuration
Viewing the network size status
The Management application enables you to view the network size status at a glance by providing a
status icon on the Status Bar. Double-click the icon to launch the Memory Allocation pane of the
Options dialog box.
NOTE
If you exceed the recommended count, the network size status icon refreshes when the License is
refreshed (every three hours) or after a client restart.
NOTE
The recommended count is the supported scalability limit based on the network size. If the
maximum license count is less than the recommended count, the license count displays as the
recommended count.
The following table illustrates and describes the icons that indicate the current network size status.
TABLE 21
Icon

Product communication settings

You can configure HTTP or HTTPS connections between the products and the Management
application server.
Configuring SAN communication
To configure connections between the SAN devices and the Management application server,
complete the following steps.
1. Select Server > Options.
2. Select Product Communication from the Software Configurations list in the Category pane.
122
Description
This icon displays when the network size is within the recommended count.
This icon displays when the network size exceeds the recommended count. This icon displays
when any of the following counts are exceeded:
•
SAN Product Count
•
San Port Count
•
Fabric Count
•
The Options dialog box displays.
The Product Communication pane displays (Figure 40).
Brocade Network Advisor SAN User Manual
53-1002696-01